Menu Mode; Using The Menu; Menu Mode Reset - Yaesu FTDX-9000D Operation Manual

M M
The Menu system of the FT
the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from "AGC
1" to "TX GNRL 160."
1. Press the MNU key (#
list will appear on the TFT, and you will see the Menu
Groups, Menu Items and the current settings for each
item displayed on the TFT.
2. Rotate the Main Tuning Dial (#
TFT's F6 and F7 keys) to select the Menu item
you wish to work on.
3. Rotate the CLAR/VFO-B knob (#
TFT's F4 and F5 keys) to change the current
setting of the selected Menu ite,.
4. When you have finished making your adjustments,
press and hold in the MNU key for two seconds to
save the new setting and exit to normal operation. If
you only momentarily press the MNU key, the new
settings will not be retained.
Advice
It is possible to retain your Menu settings in the CF (Com-
pact Flash) card for archives purposes. Please see the
separate TFT Manual for details.
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel POWER switch (#
2. Press and hold in the MNU key (#
transceiver back on. Now release the MNU key.
Page 126
9000D provides extensive customization capability, so you can set up your transceiver just
U
) momentarily. The Menu
) (or press the
) (or use the

Menu Mode Reset

) off.
), and while holding it in, press the POWER switch to turn the
M
Main Tuning Dial
FT 9000D O
MNU key
BK-IN/SPOT button
M