Operating An External Unit Connected To This System - Yamaha GX-505 Owner's Manual

Operating an external unit connected to this system

1 2
DISC DISC
3–DISC CD CHANGER
STANDBY
STANDBY
/ON
TIMER
INPUT PRESET/TUNING/BAND
BASS TREBLE
PHONES MODE DOLBY NR
DIRECTION
AUTO REVERSE CASSETTE DECK DOLBY B NR
1 1
DIRECTION
TAPE
REC/ PAUSE
YMERSION
SLEEP
3, 2 2
VOLUME
-28
E
3
DISC DISC CHANGE OPEN/CLOSE
DIGITAL AUDIO
YMERSION B.BOOST MUSIC
VOLUME
A/B/C/D/E
/
UP
DOWN
REC/ AUTO/
PAUSE MANUAL MEMORY RANDOM REPEAT TIME DISPLAY
TIMER TIME ADJ HOUR MIN
OPEN/CLOSE
3, 2 2
MUSIC
INPUT
1, 1 1
Use an external unit connected to the AUX/MD terminals on the
rear of the main unit.
To listen to a source played on an external
unit connected to this system
1
Press INPUT (or INPUT on the remote control) until
or
"AUX/MD" appears on the display.
2
Play the source.
3
Adjust the volume to the desired level by using VOLUME.
* If you prefer, you can control the sound quality (Refer to
pages 29–30).
To record a source played on this system by
using the MD recorder, tape deck etc.
connected to this system
You can record a source or a program played on the built-in CD
player, tape deck or tuner by the MD recorder, tape deck (DAT),
etc. that are connected to the AUX/MD terminals on the rear of the
main unit.
1 1
Select the source (CD, TAPE or TUNER) you want to record by
using INPUT or (or INPUT on the remote control).
2 2
Play the source and then turn VOLUME up to confirm the input
source.
3 3
Begin recording on the MD recorder, tape deck (DAT) etc.
Note
A digital-to-digital recording is possible from a CD played on the built-in
CD player to an MD (or tape) on the MD recorder (or DAT) by connecting
the DIGITAL OUT (OPTICAL) terminal on the rear of the main unit to the
MD recorder (or DAT).