Operating An External Unit Connected With This System - Yamaha GX-500VCD Owner's Manual

Operating an external unit connected with this system

DISC
YMERSION
KARAOKE
MODE
DIRECTION
1
1
6
6
A
TIME
MODE
DISC SKIP
KARAOKE
REC/PAUSE
KEY / ECHO
LEVEL
POWER
/I
E-28
1 2 3
DISC DISC DISC CHANGE OPEN / CLOSE
PRESET/ TUNING/ BAND A/B/C/D/E
3,
VOLUME
DOWN UP
1,
B.BOOST MUSIC INPUT INPUT
RANDOM REPEAT TIME
HOUR MIN
DOLBY NR REC/PAUSE AUTO/MANUAL MEMORY DISPLAY
TIMER TIME ADJ
STANDBY/ON
2 3 4 5
2 3 4 5
7 8 PRESET
7 8 9 0
B C D E
PROG R. TIME EDIT +10
REPEAT RANDOM TUNER
TUNER
VCD / CD
TIME INDEX RETURN SELECT
INTRO DIGEST DIRECTION
TAPE
YMERSION BASS BOOST MUSIC
3, 2 2
INPUT VOLUME
SLEEP
1, 1 1
Use the external unit connected to the AUX/MD terminals
on the rear of the main unit.
To listen to a source played on the
external unit connected with this system
1
Press INPUT
2 2
display.
2
Play the source.
1 1
3
Adjust the volume to the desired level by using VOLUME.
* If you prefer, you can control the sound quality (Refer to
pages 30–31) or enjoy singing karaoke (Refer to pages
32–34).
To record a source played back on this
system by using the MD recorder, tape
deck etc. connected to this system
If an MD recorder, tape deck (DAT), etc. is connected to the
AUX/MD terminals on the rear of the main unit, you can record
a source played on the built-in CD/Video CD player, tape deck
or a radio program by the MD recorder, tape deck (DAT), etc.
1 1
Select the source (VCD/CD, TAPE or TUNER) you want to
record by using INPUT
2 2
Play the source and then turn VOLUME up to confirm the
input source.
3 3
Begin recording on the MD recorder, tape deck (DAT), etc.
Note For Video CDs
Your singing karaoke can be recorded in the karaoke mode.
(Refer to page 32 for details.)
A digital-to-digital recording is possible from a CD played on
the built-in CD/Video CD player to an MD (or tape) on the
MD recorder (or DAT) by connecting the DIGITAL OUT
(OPTICAL) terminal on the rear of the main unit to the MD
recorder (or DAT).
*
When a Video CD is played, no digital signal is output
from the DIGITAL OUT terminal.
or until "AUX/MD" appears on the
or .