Recording Time; Announcement; Record Your Own Announcement - VTech CS6124 User Manual

Answering system settings

Recording time

You can set the recording time for each incoming message.
1. Press MENU/
CID or
2. Press
CID or
3. Press
CID or
4. Press
CID or
5. Press
/SELECT to confirm your selection. You hear a confirmation tone.
press
MENU

Announcement

The telephone is preset with a greeting that answers calls with "Hello, please leave
a message after the tone." You can use this preset announcement, or replace it with
your own.

Record your own announcement

1. Press /SELECT when the handset is not in use.
MENU
2. Press CID or
/SELECT.
MENU
/SELECT to select Announcement.
3. Press
MENU
4. The screen displays Play [2] Del [3] Rec [7] and the
handset announces, "To play, press 2. To record,
press 7." Press 7 to record.
The screen displays Record in 5 sec (it counts down to one
5.
second) and the handset announces, "Record after the tone.
Press 5 when you are done." After the tone, speak towards
the microphone of the handset.
The screen displays Recording . . . Stop [5]. Press 5 when
6.
finished.
The screen displays Play [2] Del [3] Rec [7] again. Press 2
7.
to play the recorded announcement; or
desired. Press 5 to stop the playback at any time.
• Your announcement can be up to 90 seconds in length.
• Announcements shorter than two seconds will not
be recorded.
when the handset is not in use.
SELECT
to select Answering sys, then press
to select Ans sys setup, then press
to select Recording time, then press
to choose from 3 minutes, 2 minutes or 1 minute, then
to select Answering sys, then press
to record again if
7
24
/SELECT
.
MENU
/SELECT
.
MENU
/SELECT .
MENU
Announcement
Play Del Rec
[2] [3] [7]
Record in 5 sec
Recording
...
Play Del Rec
[2] [3] [7]
Stop
[5]