Table of Contents
Advertisement
Answering system settings (handset only)
Message alert tone
When the message alert tone is set to ON, and there is at least one new
message, the telephone base beeps every 10 seconds.
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1.
When the handset is in idle mode, press MENU/
enter the main menu.
2.
Press
or
to scroll to >Answering sys, then press
/SELECT.
MENU
3.
Press
or
to scroll to >Ans sys setup, then press
/SELECT.
MENU
4.
Press
or
to scroll to >Msg alert tone, then press
/SELECT.
MENU
5.
Press
or
to choose On or Off.
6.
Press
/SELECT to confirm your setting and you hear a
MENU
confirmation tone. Press
/CANCEL to cancel.
OFF
1.
The message alert tone beeps only if all the conditions
below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
2.
To temporarily turn off the message alert tone, see page 61.
Unless you change it,
to
SELECT
Play messages
>Answering sys
Answer ON/OFF
>Ans sys setup
Remote code
>Msg alert tone
MSG ALERT TONE
>On
23
23
Telephone base settings
Using the menu
To enter the handset menu:
1.
Press MENU/
when the telephone base is not
SELECT
in use.
2.
Press
/
or /
until the screen displays the desired
CID
feature menu.
3.
Press
/SELECT to enter that menu.
MENU
•
To return to the previous menu, press
•
To return to idle mode, press and hold
Go to Answering system settings starting on page 43 for
instructions on how to use a telephone base to modify the
answering system settings shown below.
Setting
Announcement (record, play and delete)
Answer on/off
Call screening
Number of rings
Remote access code
Message alert tone
Voice language
Message recording time
/CANCEL.
>Play messages
OFF
Answering sys
/CANCEL.
OFF
Page
43-44
45
45
46
46
47
47
24
24
Hide quick links:
Advertisement
Table of Contents
