Configuring Before Scanning - Visioneer Strobe XP 300 User Manual

74 V S
ISIONEER TROBE
Right-click on Configure Before
Scan to get the menu, and choose
the interface to use for configuring.
XP 300 S U '
CANNER SER S
C B
ONFIGURING EFORE
You can manually configure the scan settings before beginning the
scanning process. In that case, you select Configure Before Scan as the
Configuration. When start to scan, the scanning stops and one of the
scanning interfaces appears for you to set the scanning options.
To configure before scanning:
1. Open the OneTouch Properties window.
2. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The Twain Interface appears for you to configure the
scanning. See "Scanning from PaperPort" on page 99.
WIA—The Windows Image Acquisition Interface (WIA) appears
for you to configure the scanning. See "Scanning Using the
Windows Image Acquisition (WIA)" on page 110.
Note: The WIA option is only available if your computer is running
Microsoft Windows XP.
3. Click OK or Apply on the OneTouch Properties window.
G
UIDE
S
CANNING