The Device Settings Tab - Visioneer Strobe XP 300 User Manual

10. Click OK to save the new configuration.
It will now appear in the list of Scan Configurations on the
OneTouch Properties window for the appropriate Destination
applications.
T D S
HE EVICE ETTINGS
A Device Settings tab appears on the Scan Configurations dialog box
when your selected Destination Application sends the scanned image to
a printer, fax application, or other device. You use the options on the
Device Settings tab to select settings for the device.
To select Device Settings:
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the scanned image is too
big to be printed or faxed on a single page, the image will
automatically be reduced to fit the page.
Actual size, crop image if necessary—If the scanned image is to big
to be printed or faxed on a single page, the image will automatically
be cropped around its edges to fit on the page.
Center image on page—The image will be printed in the center of
the page instead of at the top right corner.
S N O
ELECTING EW
T
AB
T S S
NE OUCH CAN ETTINGS
69