MS-6743 M-ATX Mainboard
IrDA Infrared Module Header: JIR1 (865PE only)
The connector allows you to connect to IrDA Infrared module. You
must configure the setting through the BIOS setup to use the IR function.
JIR1 is compliant with Intel
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the chassis is opened,
the switch will be short connected. The system will record this status and
show a warning message on the screen. To clear the warning, you must enter
the BIOS utility and clear the record. JCI1 is compliant with Intel
Panel I/O Connectivity Design Guide.
2-20
®
Front Panel I/O Connectivity Design Guide.
1
5
JIR1
Pin Definition
Pin
Signal
1
NC
2
NC
3
VCC5
4
GND
5
IRTX
6
IRRX
2
6
JCI1
1
CINTRU
GND
2
®
Front