NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual page 97

Tip: Choose connection names that make sense to the people using and
c. Enter the following settings:
• Connection Security: Secure.
• ID Type: IP Subnet.
• Subnet: In this example, type 192.168.3.1 as the network address of the DG834G v4.
• Mask: Enter 255.255.255.0 as the LAN Subnet Mask of the DG834G v4.
• Protocol: Select All to allow all traffic through the VPN tunnel.
d. Select the Connect using Secure Gateway Tunnel check box.
e. Select IP Address in the ID Type drop-down list.
f. Enter the public WAN IP Address of the DG834G v4 in the field directly below the ID
Type drop-down list. In this example, 22.23.24.25 is used.
The resulting connection settings are shown in
3. Configure the security policy in the NETGEAR ProSafe VPN Client software:
a. In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking the + symbol. My Identity and Security Policy subheadings appear below
the connection name.
b. Click the Security Policy subheading to view the Security Policy settings.
Figure 6-10
Virtual Private Networking
ADSL2+ Modem Wireless Router DG834G Reference Manual
administering the VPN.
v2.0, September 2007
Figure 6-10.
6-11