NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual page 158

ADSL2+ Modem Wireless Router DG834G Reference Manual
Figure B-17
c. Select Secure in the Connection Security check-box group.
d. Select IP Subnet in the ID Type drop-down list.
e. In this example, type 192.168.0.1 in the Subnet field as the network address of the
DG834G v4.
f. Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834G v4.
g. Select All in the Protocol drop-down list to allow all traffic through the VPN tunnel.
h. Select the Connect using Secure Gateway Tunnel check box.
i. Select Domain Name in the ID Type drop-down list, and enter fromDG834G.com (in
this example).
j. Select Gateway Hostname and enter ntgr.dyndns.org (in this example).
k. The resulting connection settings are shown in
3. Configure the Security Policy in the ADSL2+ Modem Wireless Router software.
a. In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking on the + symbol. My Identity and Security Policy appear below the
connection name.
B-16
Figure
v2.0, September 2007
B-17.
NETGEAR VPN Configuration