NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual page 96

ADSL2+ Modem Wireless Router DG834G Reference Manual
If you do not have a modem or dial-up adapter installed in your PC, you might see the
warning message stating "The NETGEAR ProSafe VPN Component requires at least one
dial-up adapter be installed." You can disregard this message.
b. Reboot the remote PC.
The ProSafe icon (
c. Double-click the ProSafe icon to open the Security Policy Editor.
2. Add a new connection.
a. Run the NETGEAR ProSafe Security Policy Editor program, and, using the
Configuration Worksheet" on page
b. From the Edit menu of the Security Policy Editor, click Add, and then click Connection.
Figure 6-9
A New Connection listing appears in the list of policies. Rename the New Connection so
that it matches the Connection Name field in the VPN Settings screen of the DG834G v4
on LAN A.
Note: In this example, the connection name used on the client side of the VPN
6-10
) is in the system tray.
6-6, create a VPN connection.
tunnel is toDG834, and it does not have to match the RoadWarrior
connection name used on the gateway side of the VPN tunnel because
connection names are irrelevant to how the VPN tunnel functions.
v2.0, September 2007
"VPN Tunnel
Virtual Private Networking