NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual page 102

ADSL2+ Modem Wireless Router DG834G Reference Manual
This causes a continuous ping to be sent to the first DG834G v4. After between several
seconds and two minutes, the ping response should change from timed out to reply.
Figure 6-16
Once the connection is established, you can open a browser on the PC and enter the LAN IP
address of the remote DG834G v4. After a short wait, you should see the login screen of the
modem router (unless another PC already has the DG834G v4 management interface open).
You can view information about the progress and status of the VPN client connection by
opening the NETGEAR ProSafe Log Viewer.
To launch this function, click the Windows Start button, then select Programs > NETGEAR
ProSafe VPN Client > Log Viewer. The Log Viewer screen for a successful connection is
shown in the following figure:
Figure 6-17
Note: Use the active VPN tunnel information and pings to determine whether a failed
connection is due to the VPN tunnel or some reason outside the VPN tunnel.
6-16
v2.0, September 2007
Virtual Private Networking