Recording A New Trip (Route); Viewing Trip Data - Bushnell Backtrack D-Tour Instruction Manual

RECORDING A NEW TRIP (ROUTE)

• Press TRIP (3) to enter Trip mode. HOLD the TRIP
button to start recording new trip data. The display
shows a moving "hiker" icon, along with updated
readouts of elapsed distance and average speed
during your trip (Fig. 10). Keep the D-Tour powered
ON during your trip.
• To stop recording the trip data, HOLD the TRIP
button again.
• The D-Tour automatically saves the data it collects
between the time you start and stop recording your
trip, including the date and time of the trip, total
distance traveled, your average speed, and changes
in altitude and temperature.
• Press the TRIP button to view the distance and
average speed of your last trip, along with a remaining
memory indicator (% of trip data memory used) (Fig.
11). The D-Tour can store up to 48 hours of total trip
data (can be multiple trips on different days).

VIEWING TRIP DATA

After recording at least one trip, connecting the D-Tour to
your computer will enable you to see the path you took
on any of 4 types of map, view a trip data graph, and share
your trip via email or social media. To get the software:
• Go to http://backtrackdtour.com/ and follow the
directions to create an account (free) and register
your D-Tour, and download the software app (Fig.
13, next pg.). Your account provides online backup
for all your trip data. (Serial number is inside the battery
compartment-(Fig. 12)). After registering, you'll be
taken to a screen to download the D-Tour application
(Fig. 14) (Adobe Air® is required-it will be installed
automatically if you do not already have it on your
Fig. 10
Fig. 11
Fig. 12
7