Britax FRONTIER 85 User Manual page 22

Installing the Child Seat: Harness Mode
1
Rotate the positioning block to the
front and place the child seat on the
vehicle seat.
* Ensure harness height is adjusted
to fit your child.
2
Position the shoulder part of the
vehicle belt behind the head restraint.
IMPORTANT: DO NOT route the vehicle
belt under the cover or through the belt
guide on the head restraint.
3
Route the lap and shoulder parts
of the vehicle belt over the lap belt
guide, through the belt slot, across
the back of the child seat shell, then
through the second belt slot.
4 Verify the vehicle belt is not twisted,
then buckle.
5 Push the child seat firmly into the
vehicle seat while removing all slack
from the lap part (a), then from the
shoulder part (b) of the vehicle belt.
* Ensure that the vehicle belt is
locked as directed by your vehicle
owners manual.
* The child seat is secure when it
cannot be moved front-to-back
or side-to-side more than 1 in.
(2.5 cm) at the belt path. If the
child seat is not secure, repeat
the installation procedure or use a
different seating location.
6
Firmly press the Versa-Tether ®
to the vehicle tether anchor to attach.
Remove all slack from the tether
webbing.
7
Use the elastic strap to contain extra
webbing.
40
3
OR
hook
OR
Check Versa-Tether
(Top Tether) attachment
Check that there is
LESS than 1 in. (2.5 cm)
of movement (front to back
or side to side) at the belt path
4
Checklist
Check that positioning block is rotated to the front.
9
Check all connections and verify that child seat is secure.
9
* The child seat is secure when it cannot be moved front-to-
back or side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation procedure
or use a different seating location.
9 Ensure any excess Versa-Tether
band. Always ensure any excess webbing is contained within
your vehicle
Installing the Child Seat: Harness Mode
®
<1 in.
Check vehicle
buckle attachment
Check that the
Positioning Block is
rotated to the front
webbing is stored in elastic
®
Check that Versa-Tether
®
(Top Tether) webbing is
stored in elastic band
41