Britax CHAPERONE User Manual page 72

70 Care and Maintenance
Replace the Buckle
NOTE: If removed, pull the belly pad over the metal retainer to replace
prior to step 1.
Turn the buckle strap retainer
1
so that the short side will go
through the desired slots in
the cover, foam and infant
carrier shell.
3 Slide the buckle strap retainer
into the tabs so it lies flat
against the infant carrier shell.
2 Thread the buckle strap
retainer through the desired
slots in the infant carrier shell
and cover to the bottom of the
infant carrier shell.
4 Check that the buckle strap
is not twisted and that the red
release button faces out.