Table of Contents
Advertisement
12
Verify that all connections are secure. Check that:
9 The LATCH strap is not twisted.
9 The LATCH connectors are properly aligned.
9 The excess LATCH webbing has been secured in the lock-off.
9 The infant carrier handle is rotated into any locked position.
9 The infant carrier is secure.
* If the base and infant carrier can be moved more than 1 in. (2.5 cm)
front-to-back or side-to-side at the LATCH strap path, repeat installation
or choose another seating location.
13
Check the recline angle.
IMPORTANT: If a correction is required, do not turn the recline
adjustment knob until tension has been removed from the LATCH strap.
NOTE: It may be necessary to install the base more than once to
achieve the proper recline angle.
Installing the Base
14
The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.
21
Hide quick links:
Advertisement
Table of Contents
