Table of Contents
Advertisement
26
Installing the Base
10
Verify that the vehicle belt is tight and that the base is secure. The
base is secure when it moves less than 1 inch (2.5 cm) front-to
back or side-to-side at the vehicle belt path.
11
Verify that all connections are secure. Check that:
9 The vehicle belt is not twisted.
9 The vehicle belt is tight and locked.
* Check that the vehicle belt has been properly routed through the lock-off
and that the lock-off is closed tightly.
9 The infant carrier handle is rotated into any locked position.
9 The infant carrier is secure.
* If the base and infant carrier can be moved more than 1 in. (2.5 cm)
front-to-back or side-to-side at the vehicle belt path, repeat installation or
choose another seating location.
12
Check the recline angle.
NOTE: It may be necessary to install the base more than once to
achieve the proper recline angle.
13
The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.
Hide quick links:
Advertisement
Table of Contents
