Britax CHAPERONE User Manual page 44

42 Installing Your Infant Carrier without Base
8 Buckle the vehicle belt.
* The vehicle belt should be tight
around the infant carrier. If it
is not tight, unbuckle the belt,
remove the locking clip, and
repeat steps 2 – 7.
10 Verify that all connections are secure. Check that:
9 The vehicle belt is not twisted.
9 The vehicle belt is tight and locked.
* Ensure that a locking clip has been properly installed.
9 The infant carrier handle is rotated into any locked position.
9 The infant carrier is secure.
* If the infant carrier can be moved more than 1 in. (2.5 cm) front-to-back
or side-to-side at the vehicle belt path, repeat installation or choose
another seating location.
11 Check the recline angle.
9 Adjust the infant carrier handle
to any locked position.