Britax CHAPERONE User Manual page 70

68 Care and Maintenance
Cleaning the Harness Adjuster
• BRUSH AWAY LOOSE DEBRIS using a soft bristled brush.
• SPONGE CLEAN using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Use solvents
* Use abrasive cleaners
* Disassemble the harness adjuster
* Iron
NOTE: Periodically check the harness adjuster area to be sure it is
clean and free of food, coins, dirt, or other debris. Remove any debris to
prevent interference with the harness adjuster mechanism.
Cleaning the Buckle
Remove the Buckle
1 Remove the infant carrier from the base if attached.
2 Pull the infant carrier cover
and foam back so the buckle
slots are visible.
Locate the buckle strap
3
retainer attached to the
opposite end of the buckle
strap on the bottom of the
infant carrier shell.