Programming Your Breville Die Cast Programmable Espresso Machine - Breville BES820XL Manual

Die cast programmable espresso machine
Table of Contents

Advertisement

Available languages

Available languages

pROgRAMMINg YOuR BREVILLE DIE CAST pROgRAMMABLE ESpRESSO MACHINE

MANuAL ESpRESSO
Press and hold the single
button. Release the button once
sufficient coffee has flowed into the cup.
NOTE: pRE-BREW FuNCTION
When a single or double coffee is
selected, the machine will pump
water momentarily, followed by
a pause then continues to pump
the water through to the ground
coffee in the filter holder. The
ground coffee is moistened by
a small amount of water before
full extraction then expands
resulting in greater pressure
build-up to extract all the oils
and full flavor from the
ground coffee.
18
STEp 8 – EMpTYINg THE FILTER HOLDER
Remove the filter holder from the group
head by rotating the filter holder to the
left until it releases. To empty the used
coffee grounds, turn the filter holder
upside down in a bin and gently tap out
the coffee (used coffee grounds should
be thrown away with domestic waste
and not down the sink which may block
drains). Remove the filter by using the
indents on the side of the filter holder.
Rinse the filter and filter holder with water
and allow to dry.
or two cup
WARNINg: THE METAL pARTS OF THE
FILTER HOLDER MAY STILL BE
VERY HOT. COOL THESE pARTS IN
COLD WATER.

Advertisement

Table of Contents
loading

Table of Contents