Breville BES820XL Manual page 29

pROBLEM
Machine is making a loud and
continuous pumping noise
Coffee is too weak or watery
No steam/hot water is generated
Milk is not foamy after texturing
Machine is not working
pOSSIBLE CAuSES
Water tank is empty
Water tank is not securely in place
Coffee grind is not fine enough
Machine is not turned on
Water tank is empty
Selector Control is not in 'Steam' or 'Hot
Water' position
Steam Wand is blocked
Not enough steam
Milk is not fresh and cold
The unit appears to be 'on' but the
machine ceases to operate
WHAT TO DO
Refer to step 1 – 'Filling The Water Tank', page 14 .
Refer to step 1 – 'Filling The Water Tank', page 14 .
Ensure you use a suitable espresso grind. Use
a dark roast coffee generally labelled 'Espresso
Blend'.
Refer to 'The Grind' on page 22.
Ensure the machine is plugged in and the power
is on.
Refer to step 1 – 'Filling The Water Tank', page 14.
Turn the selector control to the 'Steam' or 'Hot
Water' position.
Use the pin on the cleaning tool to clear the
opening. If the steam wand continues to be
blocked remove the tip of the steam wand using
the spanner in the middle of the cleaning tool.
to 'Care and Cleaning', page 24.
Steam wand may be blocked.
Cleaning', page 24.
Milk must be cold and fresh.
Refer to 'How To
Texture Milk For A Cappuccino Or Latté', page 19.
The safety thermal-cut may have activated due to
the pump overheating. Turn the machine off and
allow it to cool for about 30-60 minutes.
Refer
Refer to "Care and
29