Care And Cleaning - Breville Avance BDF200 Manual

Care and Cleaning

Before cleaning the deep fryer, always make sure the
•
unit is disconnected from the power outlet.
• Make sure the unit and oil are completely cool.
• Do not attempt to move or carry the deep fryer,
element and control assembly while it is hot
Wash the basket in hot soapy water.
•
Dry thoroughly.
•
• Remove the control assembly of the deep fryer by
lifting upwards (see fig 5).
• Grasp each side of the removable bowl and lift
upwards (see fig 6).
Empty the bowl of cooled oil. As oil can be re-used
•
several times (depending on type of food cooked),
filter the oil through a fine sieve (such as a new
chux cloth).
AlWAYS TURN ThE APPlIANcE OFF, TURN ThE POWER OFF AT ThE POWER OUTlET AND
ThEN UNPlUG cORD BEFORE ATTEMPTING TO MOvE ThE APPlIANcE AND BEFORE clEANING.
DO NOT UNDER ANY cIRcUMSTANcES IMMERSE ThE cONTROl ASSEMBlY, ThE SUPPlY cORD
OR PlUG IN WATER OR ANY OThER lIQUID.
10
The removable enamel bowl allows for easy cleaning.
•
Wipe down the bowl with absorbent paper, then a
damp cloth and a little mild detergent. Finally wipe
the bowl with a clean damp cloth and dry with a
clean dry cloth.
Wipe over the controller assembly and element with a
•
damp cloth and a little mild detergent. Finish off with
a clean damp cloth followed by a clean dry cloth.
The removable enamel bowl, frying basket and outer
•
body are dishwasher safe.
Wipe over the outside of the unit with a damp cloth
•
and a little mild detergent. Finish off with a clean
damp cloth followed by a clean dry cloth.
Reassemble unit for storage.
•
Fig. 5
Fig. 3