Know Your Breville Baker's Oven; Bread And Dough Settings - Breville BB280 Instructions For Use And Recipe Book

KNOW YOUR BREVILLE BAKER'S OVEN

Large viewing window Bread pan
LED window display
Easy to use control panel
Bakes 750g and 1kg loaves
13 hour preset timer
8 automatic programs
for bread and dough
Power interruption
protection
Start/Stop button
6
Oven (baking chamber)
KNOW YOUR BREVILLE BAKER'S OVEN cont'd
MAIN FEATURES OF THE CONTROL PANEL
The Control Panel is activated by switching the bread machine on at the power point and at the
ON/OFF switch located under the right-hand side of the appliance.
The Control Panel is designed to perform
several functions. The LED display indicates
the setting and crust colour selection then the
completion time for the setting. The various
buttons are used to set the functions and to
start or stop the bread machine. The buttons
should be pressed firmly. A soft "beep" sound
is made as each button is pressed.
Display Window The Display Window shows firstly the setting and crust colour selected,
then automatically changes to show the total time for the setting. When
the Start button is pressed the time displayed (in hours and minutes) is
the time remaining until the selected setting is completed.
Menu Press this button to select the 8 automatic settings available. These
settings are listed on Page 8 "Bread and Dough Setting Selections".
Each time the Menu button is pressed, the setting is changed and a red
light illuminates alongside the setting selected. The setting selected is
also shown on the Display Window as a number between1 to 8.
Crust Press the Crust button to select the 3 crust colours available for the
bread settings only. The colour selected is shown on the Display
Window as a letter P, H or L.
P = Medium crust colour
H = Dark crust colour
L = Light crust colour
Timer Use the Preset Timer to delay the start of the selected program. Press
the + or – buttons (which will move time up or down in 10 minute
increments) to preset the timer (Refer page 9).
Start/Stop The Baker's Oven features a combined Start/Stop button.
To Start: Press the Start button to commence the selected program or
begin timer countdown for the Preset Timer.
To Stop: To stop and cancel the bread machine in mid-cycle the Stop button
must be pressed down and held for 5-10 seconds until the machine beeps
and the Display Window is reset. This will result in the program being
cancelled. DO NOT PRESS THE 'STOP' BUTTON when checking the bread
as this will cancel the cycle. The machine will not continue operation.
7