Wireless Lan; Monitor - Toshiba Satellite P10-304 User Manual

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator.
For more information on wireless communication, refer to Chapter 4,
Operating Basics.
Problem
Cannot access
Wireless LAN

Monitor

Refer also to Chapter 7, Optional Devices, and to your monitor's
documentation.
Problem
Monitor does not turn
on
No display
Display error occurs
Satellite P10 Series
Procedure
Make sure the computer's wireless
communication switch is set to on.
Use the Config Free program that comes pre-
installed in your computer to see LAN status.
If problems persist, consult your LAN
administrator.
Procedure
Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Troubleshooting
8-21