Tv-Out; Setting Up More Than One Display - Toshiba Satellite P10-304 User Manual

TV-Out

Use this jack to connect to a television. Be sure to use a 4 pin type
S-video cable.

Setting up more than one display

The following applies for the GeForce FX Go5100, GeForce FX Go5200,
and the GeForce FX Go5600 though as written is describes the GeForce
FX Go5200. Select the Settings tab in Display Properties. Click on
Advanced and select GeForce FX Go5200. The display devices attached
to your computer will be shown. If not, click Detect Displays. If the
GeForce FX Go5200 tab is not visible when you click Advanced, follow
the procedure in the section Multiple display properties.
1. If you have more than one external display attached to your computer,
select the displays you want to use by right-clicking on either of the
pictures in the above window and selecting Select Output Device...
2. Select the display mode you want to use. You have the option of
configuring both displays as clones (so that the image on one is
exactly mirrored on the other) or configuring the two displays as a
single desktop. This has the advantage of greatly expanding the
desktop area, allowing you to, for instance, play a DVD on the
television screen while running a word processor on the computer's
built-in display
3. After selecting your preferred display mode, Click Apply.
Satellite P10 Series
Operating Basics
4-19