Usb; Tv Output Signal - Toshiba Satellite P10-304 User Manual

USB

Refer also to your USB device's documentation.
Problem
USB device does not
work

TV output signal

Problem
Display on TV is poor
No display
If you turn the computer off in Standby mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
Satellite P10 Series
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in BIOS is set to Enabled.
This feature works only for mouse and keyboard.
Also, the mouse and keyboard must be
connected, before you boot the computer.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, Keyboard.
If problems persist, contact your dealer.
Troubleshooting
8-18