Self Test - Toshiba Satellite P10-304 User Manual

Self test

When the computer starts up, the self test will be run automatically, and
the following will be displayed:
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating
system. Depending on how the Boot Priority is set in the computer's
BIOS. If any of the following conditions are present, the self test failed:
■
The computer stops and does not proceed to display information or
messages except the TOSHIBA logo.
■
Random characters appear on the screen, and the system does not
function normally.
■
The screen displays an error message.
Turn off the computer and check all cable connections as well as
PC Card and memory module connections. If the test fails again, contact
your dealer.
Satellite P10 Series
Troubleshooting
8-4