Using The Two-Graph Mode - Texas Instruments TI-89 Manual Book

Using the Two-Graph Mode

Setting the Mode
The Two-Graph
Screen
In two-graph mode, the
features are duplicated, giving you two independent graphing
calculators. The two-graph mode is only available in split
screen mode. For more information about split screens, refer
to Chapter 14.
Several mode settings affect the two-graph mode, but only two
settings are required. Both are on Page 2 of the
1. Press 3. Then press „ to display Page 2.
2. Set the following
required modes.
¦
=
Split Screen
or
TOP-BOTTOM
LEFT-RIGHT
¦
Number of Graphs = 2
3. Optionally, you can set the following modes.
¦
Page 1:
Graph
¦
Page 2:
Split 1 App
¦
Split 2 App
¦
Graph 2
¦
Split Screen Ratio
(
TI-92 Plus
4. Press ¸ to close the dialog box.
A two-graph screen is similar to a regular split screen.
Graph 1:
left or top
side
Thick border
indicates
active graph
side
'
TI-89 / TI-92 Plus s
= mode for top or left side of the split
Graph
= application for top or left side
= application for bottom or right side
= mode for bottom or right side
Graph
= relative sizes of the two sides
only)
Graph mode of active graph
Active graph side:
GR#1 or GR#2
Chapter 12: Additional Graphing Topics
graph-related
dialog box.
MODE
Graph 2:
right or
bottom side
209