The Front Display Menu; The Clock And Alarm Menu - NAIM UNITI - Reference Manual

Na im Un it i Setu p
Note: The wireless passphrase/access key is created when
the wireless router is first set up and could be a word or a
series of numbers and letters. If the passphrase/access key
is not known, check on the router settings page or with the
person who initially set up the router.
Note: If a router offers multiple security configurations,
NaimUniti will automatically offer only the most secure one.
Note:
If WEP security is used the router should be set to
"auto" or "open" authentication.
If the selected network is insecure
and requires no passphrase or
access key to join, NaimUniti will
display an alert message. Pressing
ok/list
the handset key will
immediately connect NaimUniti
to the network and display a
confirmation screen.
Note: Wireless connection difficulties can sometimes
be resolved by changing the wireless connection
channel in the router settings.
4.6.2 Non-DHCP (Static) Network
Connection
If DHCP is de-selected in the
Network Settings menu, five
further parameters will be
displayed.
Parameter Options
IP: User definable (numerical entry)
Default: 0.0.0.0
Mask: User definable (numerical entry)
Default: 0.0.0.0
Gateway (Gtwy): User definable (numerical entry)
Default: 0.0.0.0
DNS1: User definable (numerical entry)
Default: 0.0.0.0
DNS2: User definable (numerical entry)
Default: 0.0.0.0
These settings enable NaimUniti to connect to a network
using a fixed IP address. On selecting each one in turn,
numerical entry screens will be displayed that require
completion with the appropriate network IP address
settings. Consult your network router's user documentation
for help with specifying fixed IP address settings.

4.7 The Front Display Menu

The Front Display setup menu
enables the behaviour of the
NaimUniti front panel display to
be modified. The options are
tabulated and described in the
following section:
This wireless network is
insecure and requires no
passphrase or access key.
Press OK To Connect
Network Settings 1/5
192.168.0.80
4IP:
Mask: 255.255.255.0
4 . 8 Th e C l o c k a n d A la r m M e n u
Gtwy: 192.168.0.1
DNS1: 192.168.0.1
Front Display 1/4
4Off During Mute: No
Auto Off: 2 mins
Clock When Off: Yes
Logo Off: If Muted
Parameter Options
Off During Mute:
Yes / No
Auto Off: Select time from list
Clock When Off: Yes / No
Logo Off: If Muted / If Display Off / Always / Never
When Off During Mute is selected the front panel display
will switch off when mute is engaged.
length of time the display will remain switched on after
the last interface operation is carried out. Time periods of
between 10 seconds and 1 hour can be selected.
Note: If the display has been switched off using the
handset disp key this setting will take priority over the Auto
Off setting. The display will always switch on briefly when
control commands are received.
Clock When Off
The settings enables the clock to remain
displayed when other display settings are switched off.
Note: If Clock When Off is set to "Yes" and Logo Off is set
to "If Muted", the clock display will dim automatically 10
seconds after mute is selected.
Logo Off
The settings select the circumstances in which the
front panel logo illumination will switch off.
The Clock & Alarm setup menu
enables the NaimUniti clock
to be set and alarms to be
configured.
Selecting Set Weekday Alarm
or Set Weekend Alarm opens a
menu that offers the following parameters and options:
Parameter Options
Enabled: Yes / No.
Selecting Yes
primes the
alarm. Selecting
No disables the
alarm.
Alarm Time: 07:00. Selecting the time opens a screen
that enables the alarm time to be set by
using the remote navigation (
4 ) and numeric keys.
Input: NaimUniti external inputs or radio presets
can be selected to become the alarm
audio source.
The NaimUniti radio can only be used as an alarm
Note:
signal using stored radio presets.
Volume: 30. The alarm audio volume can be set
independently of the default NaimUniti
volume using the remote handset
down 6
and (
Weekday alarms operate on Mondays to Fridays. Weekend
alarms operate on Saturdays and Sundays.
Auto Off defines the
Clock & Alarm 1/5
4Set Weekday Alarm
Set Weekend Alarm
Adjust Time Zone
Resync Time From Net
Weekday Alarm 1/4
No
4Enabled:
Alarm Time: 07:00
Input: Fluid Radio
Volume: 30
5 6 3
up 5
( )
) keys.
13