Table of Contents
Advertisement
This owner's manual explains the basic instructions of this unit. Some DVDs are produced with limited
operation during playback. For example, many DVDs do not allow users to skip government warnings,
or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction
notes of discs.
"
" may appear on the screen during operation. A "
by the unit or disc.
PLAYING A DISC
1. Press the STANDBY/ON button to turn on the unit.
2. Press the FUNCTION button repeatedly to select DVD mode or directly to press DVD button on the remote,
then press the ENTER button.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the
PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle with label side facing towards until hear a
"click".
5. Push the disc tray to close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring
you to the main menu of DVD, or start playing the DVD. If the unit does not automatically start playing the
DVD, press the
PLAYING A PICTURE FILE DISC
This unit can play JPG files recorded on CD-R and CD-RW discs.
1. Press the
PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle with label side facing towards until hear a
"click".
3. Push the disc tray to close the disc door.
4. The unit will load the disc and automatically display the contents of the disc on the screen, while also
beginning to play the picture file. These files will then be played back one by one.
5. Press the
STOP button to go to the folder list.
6. Press the
or
button to highlight a file to play. Press the
NoTe
• You can press the
playback.
• You also can use the GOTO function or use the numbered buttons to enter the image number to quickly
select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by 90°.
PAUSING PLAYBACK (STILL MODE)
Press the
PAUSE button. To resume normal playback, press the
the
PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the
STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the
If you press the
STOP button twice, the unit's memory will be cleared and pressing the
will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the
PREV button to go back to previous chapters/tracks.
• Press the
NEXT button to advance chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to jump directly to that track number.
FPE1508DV_UL_IB_MSTAR+MTK_E21-27.indd 21
CD/DVD OPERATION
PLAY button.
PAUSE button to interrupt playback, and press the
" means that the desired operation is not permitted
PLAY button to start playback.
PLAY button. each time you press
PLAY button.
E - 21
PLAY button to resume
PLAY button
1/10/2008 10:15:24 AM
Advertisement
Table of Contents
