Table of Contents
Advertisement
This owner's manual explains the basic instructions of this unit. Some DVDs are produced to
limit operation during playback. For example, many DVDs do not allow users to skip government
warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the
instruction notes of discs.
"
" may appear on the screen during operation. A "
not permitted by the unit or disc.
PLAyING A DISC
1. Press the STANDBy/ON button to turn the unit on.
2. Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the
PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle, with the label side facing
the front, until you hear a "click".
5. Push the disc door gently to close it. It takes a short while for your unit to load the
disc. After loading, for most DVDs, the unit will automatically take you main menu or
start playing. If the unit does not automatically start playing the DVD, press the
button.
PLAyING A PICTURE FILE DISC
This unit can play picture files recorded on CD-R and CD-RW discs.
1. Press the
PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing
the front, until you hear a "click".
3. Push the door gently to close it. The picture files on the disc will be displayed one by
one automatically.
4. Press the
STOP button to go to the folder list.
5. Press the
or
playback.
Note:
• You can press the
to resume playback.
• You also can use the GOTO function or use the numbered buttons to enter the image
number to quickly select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by
90°.
PAUSING PLAYBACK (STILL MODE)
PAUSE button. To resume normal playback, press the PLAy button. Each time
Press the
you press the
PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the
STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the
If you press the
PLAy button will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the
PREV button to go back to previous chapters/tracks.
• Press the
NEXT button to advance chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to go directly to that
track number.
English P1-32.indd 23
CD/DVD OPERATION
button to highlight a file to play. Press the
PAUSE button to interrupt playback, and press the
STOP button twice, the unit's memory will be cleared and pressing the
" means that the desired operation is
E - 23
PLAy
PLAy button to start
PLAy button
PLAy button.
6/11/2008 12:22:28 PM
Advertisement
Table of Contents
