Nikon F80 - F 80 SLR Camera Instruction Manual page 77

Nikon
2 Reset to DX film speed setting
for new
film
3 Bracketing order
4 On-Demand Grid Lines
superimposition
display
5 Illumination for superimposition 0: Automatically illuminated for
6 Focus area selection
7 Auto Exposure Lock when
shutter release
button is lightly pressed
8 Auto film loading when camera
back is
closed
9 Closest-subject-priority Dynamic
AF in
Single Servo AF
10 Closest-subject-priority Dynamic
AF in
Continuous Servo AF
11 AE-L/AF-L button
Distributed by WWW.LENSINC.NET
file:///D|/CAMERA REPAIR/Nikon F80/F80.htm (77 of 78) [3/19/2004 11:39:25 PM]
0: Activated (initial setting)
1: Disabled
0: Metered value, under, over
(initial
setting)
1: Under, metered value, over
0: Not displayed (initial setting)
1: Displayed
low light
(initial setting)
1: Cancelled
2: Always illuminated
0: Normal selection (initial
setting)
1: Enables successive rotation
of focus
area selection
0: Disabled (initial setting)
1: Activated
0: Enabled (initial setting)
1: Disabled
0: Enabled (initial setting)
1: Disabled
0: Disabled (initial setting)
1: Enabled
0: AE/AF simultaneous lock
(initial setting)
1: Auto Exposure lock only
2: Autofocus lock only
3: Auto Exposure lock (remains
locked
until button is pressed again)
4: AF operation only starts by
pressing AE-
L/AF-L button