Nikon F80 - F 80 SLR Camera Instruction Manual page 48

Nikon
8. Auto film loading when camera back is closed (page 21)
Options: 0: Enabled (initial setting)
1: Disabled
At initial setting, film advances to the first frame when the camera back is
closed after it is loaded. However, film advance can be set not to start until
the camera back is closed and the shutter release button is fully depressed.
9. Closest-subject-priority Dynamic AF in Single Servo AF (page 40)
Options: 0: Enabled (initial setting)
1: Disabled
At initial setting, Dynamic AF Mode with Closest Subject Priority (page 40) is
activated when Dynamic AF mode is selected in Single Servo AF. However,
Dynamic AF Mode with Closest Subject Priority can be set to be disabled in
Single Servo AF.
10.Closest-subject-priority Dynamic AF in Continuous Servo AF
(page 40)
Options: 0: Disabled (initial setting)
1: Enabled
At initial setting, selecting Dynamic AF in Continuous Servo AF does not
activate Dynamic AF Mode with Closest Subject Priority (page 40). However,
Dynamic AF Mode with Closest Subject Priority can be set to be activated in
Continuous Servo AF.
11. AE-L/AF-L button (page 44/58)
Menu/Features of Custom Setting—continued
12.Command Dial functions (pages 50-57)
aperture setting (initial setting)
1: Main-Command Dial for aperture; Sub-Command Dial for
shutter speed setting
Distributed by WWW.LENSINC.NET
file:///D|/CAMERA REPAIR/Nikon F80/F80.htm (48 of 78) [3/19/2004 11:39:25 PM]
Options: 0: Disabled (initial setting)
1: Activated
Options 0: AE/AF simultaneous lock (initial setting)
1: Auto Exposure lock only
2: Autofocus lock only
3: Auto Exposure lock (remains locked until button is pressed
again)
4: AF operation only starts by pressing AE-L/AF-L button
Options: 0: Main-Command Dial for shutter speed; Sub-Command Dial for