Nikon F80 - F 80 SLR Camera Instruction Manual page 11

Nikon
the exposure meter.
2 Turn the power switch off,
mount the lens to the camera
body and set the lens aperture
to its minimum setting (largest
f-number).
2
.1 Turn the power switch off and mount the lens to the
camera body.
• Position lens in the camera's bayonet mount so that the mounting
indexes on lens and camera body are aligned, then twist lens
counterclockwise until it locks into place. (Be sure not to touch the lens
release button.)
• When the lens is not attached or when a non-CPU Nikkor lens is attached
and the power switch is turned on, f- - blinks in the LCD panel and
viewfinder, and the shutter cannot be released. See page 34 for a non-
CPU lens.
2.2 Set the lens aperture to its minimum and lock.
Distributed by WWW.LENSINC.NET
file:///D|/CAMERA REPAIR/Nikon F80/F80.htm (11 of 78) [3/19/2004 11:39:24 PM]
• Lightly pressing the shutter release button reactivates the exposure meter
and indications in the LCD panel and viewfinder for approx. 6 sec.