Nikon F80 - F 80 SLR Camera Instruction Manual page 59

Nikon
*1 Standard TTL is performed with Spot Metering. Selecting Spot Metering or Manual exposure mode
automatically changes the TTL Auto Flash mode to Standard TTL with Speedlights other than SB-28/
28DX, 27, 26, 25 and 24 that are equipped with TTL Auto Flash.
*2 Wireless Slave Flash can be performed with the SB-26. Shutter speed is automatically controlled
to slower than 1/90 sec. when the Wireless Slave Flash selector is set to 0.
*3 With the SB-21 B, autofocus can only be used when an AF Micro-Nikkor (60mm, 105mm, 200mm
and 70-180mm) is attached.
*4 TTL Auto Flash is possible with TTL Remote Cord SC-23.
SB-140.
the shutter speed does not change automatically.
*5 Ultraviolet photography can be performed only when SB-140 is set to M. (Infrared photography
cannot be performed.)
Notes on using the optional Speedlight
• See your Speedlight manual for details. If the camera groups are defined in the
manual of the Speedlight with TTL Auto Flash, see the section for camera group I.
• Flash sync speed is 1/125 sec. or slower when using an optional Speedlight.
• Available film speeds for TTL Auto Flash are ISO 25 to ISO 1000.
• With the SB-26, 25 or 24, flash sync mode set on the Speedlight overrides the
setting on the camera body.
• When Red-Eye Reduction or Red-Eye Reduction with Slow Sync is set on a
camera attached with the SB-28/28DX, 27 or 26, the Red-Eye Reduction lamp
of the Speedlight lights up.
• Even when the optional Speedlight with the AF-Assist Illuminator is attached,
AF-Assist Illuminator does not emit light unless the conditions for AF-Assist
Illumination are met (page 43).
Distributed by WWW.LENSINC.NET
file:///D|/CAMERA REPAIR/Nikon F80/F80.htm (59 of 78) [3/19/2004 11:39:25 PM]
In A or M flash mode, attach SU-2 to SC-13 with SB-11 and SB-14, or attach SU-3 to SC-13 with
SC-11 or SC-15 can also be used; however, the ready-light does not appear in the viewfinder and