Hunter 20552 Owner's Manual And Installation Manual page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8 . First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets .
7-9 . Thread the light and fan pull chains through the hole in the center
of the glass bowl . Then, thread the light pull chain through the hole
in the center of the cover plate .
7-10 . Thread the fan pull chain through the grommet hole in the side of
the cover plate .
7-11 . Place the cover plate up against the glass bowl . Align the holes in
the cover plate and glass bowl .
7-12 . Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until tight .
7-13 . Attach the extra pull chains (included) to the light and fan pull
chains using the breakaway connector . (You may find the
breakaway connector on the
end of the extra chain . )
Breakaway
Connector
14
42751-01 • 08/12/10 • Hunter Fan Company
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial