Extended Functionality That Can Be Configured As Needed (Advanced Setup Menu); Displaying/Setting The Advanced Setup Menu; Setting The Impedance Of Speakers - Yamaha RX-V371 Owner's Manual

Extended functionality that can be configured as needed (Advanced Setup menu)

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
Set this unit to the standby mode.
1
Press A while pressing and holding STRAIGHT on
2
the front panel.
Release the keys when "ADVANCED SETUP" is displayed on
the front panel display.
After approximately 3 seconds, the top menu items are displayed.
A
INFO MEMORY
BD
DVD
PHONES
INPUT TONE CONTROL
SILENT CINEMA
PROGRAM l / h
SP IMP. -8 MIN
J
1 : For detailed procedures of speaker impedance settings, refer to "Changing
speaker impedance" (☞p. 10).
3 Use PROGRAM to select the item to be set from the
following items.
In the Advanced Setup menu, you can set the following settings.
SP IMP.
REMOTE ID
INIT
4 Press STRAIGHT a few times to select the value you
wish to change.
Switch this unit to the standby mode, and then
5
STRAIGHT
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
PRESET FM AM
powered on again.
SCENE
TV CD RADIO
STRAIGHT
PROGRAM
Sets the impedance of speakers.
Changes the remote control ID of a receiver.
Initializes various settings for this unit.

Setting the impedance of speakers

SP IMP. -8 MIN
Changes the unit settings depending on the impedance of the
J1
speakers connected.
6 MIN
Select the impedance when 6Ω speakers are
connected.
8 MIN (Default)
Select the impedance when speakers above 8Ω are
connected.
SETUP
55
En