Compaq dc5800 - Microtower PC Reference Manual page 84

Service reference guide: hp compaq dc5800 business pc
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

CAUTION:
slot cover for proper cooling of internal components during operation.
8.
To install a new expansion card, hold the card just above the expansion socket on the system
board then move the card toward the rear of the chassis (1) so that the bracket on the card is
aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion
socket on the system board (2).
NOTE:
seats properly in the expansion card slot.
9.
Rotate the slot cover lock to the closed position, ensuring that it snaps securely in place.
10.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
11.
Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for
instructions on using Computer Setup.
76
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
After removing an expansion card, you must replace it with a new card or expansion
When installing an expansion card, press firmly on the card so that the whole connector

Advertisement

Table of Contents
loading

Table of Contents