Compaq dc5800 - Microtower PC Reference Manual page 134

Service reference guide: hp compaq dc5800 business pc
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

4.
Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on
the latch and rotating the latch to the open position.
5.
Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
NOTE:
to the expansion card.
a.
If you are installing an expansion card in a vacant socket, remove the appropriate expansion
slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside
of the chassis.
126 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Before removing an installed expansion card, disconnect any cables that may be attached

Advertisement

Table of Contents
loading

Table of Contents