Compaq dc5800 - Microtower PC Reference Manual page 151
Service reference guide: hp compaq dc5800 business pc
Hide thumbs
Also See for dc5800 - Microtower PC:
- User manual (72 pages) ,
- Troubleshooting manual (70 pages) ,
- Hardware reference manual (62 pages)
Table of Contents
Advertisement
3.
Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward
the front of the computer until it locks into place.
4.
Connect the appropriate drive cables:
a.
If installing a diskette drive, connect the power and data cables to the rear of the drive and
connect the other end of the data cable to the connector on the system board labeled FLOPPY.
b.
If installing a second hard drive, connect the power and data cables to the rear of the drive
and connect the other end of the data cable to the next available (unpopulated) SATA
connector on the system board in the following order: SATA0, SATA1, SATA5, SATA4.
c.
If installing a media card reader, connect the USB cable from the media card reader to the
USB connector on the system board labeled MEDIA.
NOTE:
Refer to
system board drive connectors.
5.
Replace the optical drive.
System Board Drive Connections on page 135
for an illustration of the
Drives 143
Advertisement
Table of Contents
