Compaq dc5800 - Microtower PC Reference Manual page 147

Service reference guide: hp compaq dc5800 business pc
Hide thumbs Also See for dc5800 - Microtower PC:
Table of Contents

Advertisement

6.
Rotate the drive cage to its upright position.
7.
Connect the SATA data cable to the white system board connector labeled SATA1.
8.
Route the data cable through the cable guides.
CAUTION:
There are two cable guides that keep the data cable from being pinched by the drive
cage when raising or lowering it. One is located on the bottom side of the drive cage. The other is
located on the chassis frame under the drive cage. Ensure that the data cable is routed through
these guides before connecting it to the optical drive.
9.
Connect the power cable (1) and data cable (2) to the rear of the optical drive.
Drives 139

Advertisement

Table of Contents
loading

Table of Contents