Ide Configuration; Primary Ide Master - Dell PowerEdge C6100 Hardware Owner's Manual

IDE Configuration

NOTE:
The AHCI Port is shown in SETUP screen when it is in the Enhanced AHCI or
RAID mode.
Option
Configure SATA as
Hard Disk Write Protect
(Disabled default)
IDE Detect Time Out (Sec)
(35 default)

Primary IDE Master

To configure Primary, Secondary, Third or Fourth device on the IDE channel.
Option
Device
Vendor
Size
LAB Mode:
Block (Multi-Sector
Transfer) (Auto default)
PIO Mode (Auto default)
Description
Configures the SATA:
• IDE
– SATA#1 Configuration (Enhanced default)
Configures SATA#1.
– SATA#2 Configuration (Enhanced default)
Configures SATA#2.
• Primary Master/Slave is SATA Port 0/2
• Secondary Master/Slave is SATA Port 1/3
• AHCI/RAID
• AHCI Port 0~5
Enables or disables device write protection. This is
effective only if the device is accessed through BIOS.
Selects the time out value for detecting
ATA/ATAPI device(s).
Description
Displays the type of device assigned to this channel.
Displays the manufacturer's name of the device.
Displays the size of the device (GB).
Indicates whether LAB access mode is supported or
not supported.
Indicates whether multi-sector transfer is supported.
Indicates whether PIO mode is supported.
Using the System Setup Program
41