VTech VTRZ6052 - 6052 User Manual page 52

Troubleshooting
Problem Suggeston
My cordless handset • Make sure the power cord s securely plugged nto the telephone base. Plug the unt nto a
beeps and s not
performng normally.
• Move the cordless handset closer to the telephone base. It may be out of range.
• Reset the telephone base by unpluggng the unt's electrcal power. Wat for 15 seconds and
• Other electronc products can cause nterference to your cordless telephone. Try nstallng
Common cure for • If the unt s not respondng normally, try puttng the cordless handset n the telephone base
electronc equpment
• Dsconnect the power to the telephone base.
• Dsconnect the battery on the cordless handset.
• Wat a few mnutes before connectng power to the telephone base.
• Re-install the battery and place the cordless handset into the telephone base or charger.
• Wat for the cordless handset to synchronze ts connecton wth the telephone base. Allow up
dfferent workng electrcal outlet not controlled by a wall swtch.
plug t back n agan. Allow up to one mnute for the cordless handset and the telephone base
to synchronze.
your telephone as far away from these electronc devces as possble: wreless routers, rados,
rado towers, pager towers, cellular telephones, ntercoms, room montors, televsons, personal
computers, ktchen applances and other cordless telephones.
or the charger. If it does not seem to respond, try the following (in the order listed):
to one mnute for ths to take place.
www.vtechphones.com 49