Answering System Setup; Activate The Answering System; Set The Clock - VTech i6789 User Manual

Answering system operation

Answering system setup

Activate the answering system

• Press and hold
/SKIP
or
The answering system must be turned on to answer and record messages.
/REPEAT
If the answering system is turned off, the telephone base ANS ON/OFF light
during setting the
will be off.
minutes or year by
• To turn the answering system on or off, press ANS ON/OFF.
increments of ten.
• Incoming caller ID

Set the clock

data sets the time
Before playing each message, the answering system announces the day
and date. You'll
need to set the and time the message was received. You should set the day and time before
year so the day
using the answering system so messages are dated correctly. If the clock
of the week can
has not been set before you receive messages on your answering system,
be determined
it will announce "Time and day not set." To set the clock:
from the caller ID
• Press CLOCK, the system will announce the current clock setting. The
information. The
system will then announce "To set the clock, press CLOCK."
time will be set
automatically only
• Press CLOCK again and the system will announce the year.
if you subscribe to
• Press /SKIP
caller ID service
then press CLOCK. The system will announce the hour.
provided by your
• Press
local telephone
company.
hour, then press CLOCK. The system will announce the minute.
• Setting this clock
• Press
will not affect the
minutes, then press CLOCK. The system will announce the day.
handset clock (see
• Press
page 12), they are
day, then press CLOCK. The system will announce the new clock setting
individual settings.
and return to idle mode.
27
/REPEAT until the system announces the correct year,
or
/SKIP /REPEAT, until the system announces the correct
or
/SKIP /REPEAT until the system announces the correct
or
/SKIP
/REPEAT until the system announces the correct
or
www.vtechphones.com