Ricoh Priport HQ7000 Printer Reference page 85

Status
<Macintosh only>
It takes a long time to print from
the Macintosh G3 or G4 via a hub.
The same page is being master
made many times.
Fine dot patterns are not printed • RPCS
Solid lines are printed as broken
lines.
Two or more sheets are fed to-
gether.
The set option cannot be select-
ed in the print menu.
Possible Causes, Descriptions, and Solutions
When the printer is connected to a Macintosh computer
equipped with the G3 or G4 processor via a hub, it may take
a long time to transfer data on a 100BASE-TX from the Mac-
intosh to the printer.
Make sure to clear the [Collate] check box in the [Print] dialog
box of the application.
< Windows 2000/XP and Windows Server 2003 only >
Even if the check mark is cleared in the [Collated] check box,
master making may be done everytime a page is going to be
printed. In this case, make sure to clear the [collated] check
box displayed when selecting [Copy Count] in [Advanced] dia-
log box of the printer driver.
Change the [Dithering:] setting under the [Image Adjust-
ments] tab in the [Change User Settings] dialog box under
the [Print Quality] tab in the [Printer Properties] dialog box.
• PostScript 3
Change the [Dithering:] setting in the [Advanced] dialog box
under the printer driver's [Print Quality] tab.
In the RPCS printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
In the RPCS printer driver [Change User Settings] dialog box,
change the [Dithering:] setting on the [Image Adjustments] tab.
For details, see the printer driver Help.
The option may not be set correctly.
• Windows95/98/Me
Set the option correctly in the [Device Options] tab.
• Windows 2000/XP and Windows Server 2003
Set the option correctly in the [Device Settings] tab.
• Windows NT 4.0
Set the option correctly in the [Device Settings] tab.
• Mac OS
Set the option configuration correctly in [Chooser] in the
Apple menu.
Other Printing Problems
5
79