Ricoh Priport HQ7000 Printer Reference page 13

Selecting the Cycle Setting Mode
It is possible to set the operation mode when executing master making and
printing online.
A Auto Cycle
Master making and printing of all pages are executed continuously.
If printing is suspended using the {Clear/Stop} on the control panel, it stops in
the print mode.
In this case, it is not possible to switch to the master making mode unless
printing is completed.
To resume master making from the next page, press the [End Printing] on the
display and terminate the printing operation.
B
Original Page Cycle
Operations tentatively stop after master making and printing of each page are
executed in succession.
It switches to the master making mode with printing terminated. Press the
{Start}on the control panel while in this state to resume master making from
the next page.
Note
❒ Since it switches to the master making mode when printing is concluded,
switch to the print mode and press the {Start} on the control panel to exe-
cute additional printing with printing in the concluded state.
AJK172S
AJK175S
Control Panel
1
7