Ricoh Priport HQ7000 Printer Reference page 30

Preparing to Print
❖ WEP (Encryption) Setting
Specifies the encryption of the IEEE 802.11b (wireless LAN). If this is set to
[Active], you must enter the WEP key.
• VWEP
• Active
• Inactive
• VEncryption
2
10 alphanumeric characters must be entered for 64 bit, 26 characters for 128
bit.
Note
❒ Default: Inactive
❖ Wireless LAN Signal
Shows the radio wave conditions of the access point connected in infrastruc-
ture mode.
Note
❒ Radio wave status is displayed when you press [Wireless LAN Signal].
❖ Transmission Speed
Specifies the communication speed of the IEEE 802.11b (wireless LAN).
• Auto
• 11Mbps Fixed
• 5.5Mbps Fixed
• 2Mbps Fixed
• 1Mbps Fixed
Note
❒ Default: Auto
❖ Return to Defaults
You can return the IEEE 802.11b (wireless LAN) settings to their defaults.
• No
• Yes
24