Ricoh Priport HQ7000 Printer Reference page 51

E
Click [Search for the best driver for your device. {Recommended}.], and then click
[Next>].
F
Select the [Specify a location:] check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
G
Insert the CD-ROM into the CD-ROM drive.
Note
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
H
Specify the location where USB Printing Support is located, and then click
[Next>].
If the CD-ROM drive is D, the source files of USB Printing Support are stored
in the following location:
D:\DRIVERS\USBPRINT\WIN98ME
I
Check the location, and then click [Next].
USB Printing Support is installed.
J
Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the "USB001" port is added to the [Printers]
window.
K
Click [Next>].
L
Click [Search for the best driver for your device. {Recommended}.], and then click
[Next>].
M
Select the [Specify a location:], check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
N
Insert the CD-ROM into the CD-ROM drive.
Note
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
O
Specify the location where the source files of the printer driver is stored,
and then click [Next>].
• RPCS:\DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1
• PostScript 3:\DRIVERS\PS3\WIN9X_ME\(Language)\DISK1
Installing the Software
45
2