Ricoh Priport HQ7000 Printer Reference page 84

Troubleshooting
Images are printed in the wrong
orientation.
<Only when using PostScript 3
under Windows>
The data which uses propor-
tional fonts cannot be printed
exactly as viewed on the screen.
<Only when using PostScript 3
5
under Windows>
Combine printing cannot be
done as specified.
<Only when using PostScript 3
under Windows>
Auto Magnification cannot be
done as specified.
<Only when using PostScript 3
under Windows>
Printing cannot be done even if
the data is being received in a
network environment.
<Mac OS only>
The printer is not displayed in
the Chooser.
<Mac OS Χ only>
The printer is not displayed in
the Printer list.
<Macintosh only>
It takes a long time for the [Print]
dialog box to be displayed.
78
Status
The feed orientation you selected and the feed orientation se-
lected in the printer driver's option setup might not be the
same. Set the machine's feed orientation and the printer driv-
er's feed orientation accordingly.
See the printer driver Help.
• Under Windows 95/98/Me
• Under Windows 2000/XP and Windows Server 2003
• Under Windows NT 4.0
Make sure that the same orientation is set, as well as the same
paper size set in the application.
• Under Windows 95/98/Me, check the [Paper] tab.
• Under Windows 2000/XP and Windows Server 2003,
• Under Windows NT 4.0, check the [Page Setup] tab.
If a different size has been set, select the correct paper size
and orientation.
• Windows 95/98/Me
• Windows 2000/XP and Windows Server 2003
• Windows NT 4.0
Make sure that the printer and the Macintosh are connected
in the Appletalk environment.
Depending on the processing speed of the Macintosh system,
the dialog box display may take time.
Possible Causes, Descriptions, and Solutions
Select [Substitute printer fonts for True Type Fonts when appli-
cable] in the [Fonts] tab.
Click [Advanced...] on the [Paper/Quality] tab or on the [Lay-
out] tab to display the [Advanced Options] dialog box. Select
[Download as softfont] in [TrueType Font:] in [Graphic].
Click the [Advanced] tab on the [Properties] dialog box. Se-
lect [Download as softfont] in [TrueType Font] in [Graphics] .
check the [Layout] tab.
Click [Advanced...] on the [PostScript] tab to display the
[Advanced PostScript Options] dialog box. Make sure to
clear both the [Send CTRL+D after job] check box and the
[Send CTRL+D before job] check box.
Make sure to select [No] in both [Send CTRL-D Before Each
Job:] and [Send CTRL-D After Each Job:] in the [Device Set-
tings] tab.
Make sure to select [No] in both [Send CTRL+D Before Each
Job] and [Send CTRL+D After Each Job] in the [Device Set-
tings] tab.