8598 Aztec ib
05/08/2003
Replacing/emptying
the dustbag
To obtain the best results from your
cleaner be sure to change the dustbag when
necessary, otherwise the airflow and cleaning
power will be reduced.
When the dustbag condition indicator ›
shows fully red and performance deteriorates,
first check if there are any blockages in the
accessories or tubes. If these are clear, it is
necessary to replace/empty the dustbag.
Paper dustbags
1 Remove the hose end from the hose inlet.
2 Slide the dustbag compartment lid release
¤, lift and remove the cover.
3 Pull the cardboard seal up, to close the
opening to prevent dust spillage D.
10:23
Page 5
4 Remove the dustbag from its location by
pulling the dustbag securing tab  as
shown E.
5 Insert the new dustbag into position
ensuring the cardboard collar is firmly
secured at the base as shown F.
6 Pull forward as shown G so it locks under
the plastic securing tab at the top.
7 The folds of the dustbag should be
opened out.
8 Relocate the lid at the front (carrying
handle ⁄) end first and then close the
cover securely.
Note: The securing tab  prevents the
cover being closed unless a dustbag is fitted
correctly.
Purchasing dust bags and
replacement parts
For replacement dustbags, filters and
replacement parts call our dedicated helpline
0870 167 6635.
D
E
F
G
5